Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Prikosa Engineering |
Color | Any |
Material | PP/PVC/PTFE/SS316/SS304 OR OTHER |
Warranty | 9 MONTHS |
Model Number/Name | Bellow type Pulsation dampener |
Gaskets | PTFE |
Maximum Working Pressure | 50 |
Process Connection | 15nb to 85 nb |
Surface Finishing | Ra 50 |
Nominal Pressure | 25 Bar |
Temperature | 230 Deg C |
Testing | 55 |
Bellows type pulsation dampeners are those fitted with a PTFE or stainless steel bellows separator.
DESCRIPTION AND PERFORMANCE
The body of these dampeners is made in AISI 316L stainless steel as a standard; but is also made in plastic materials like PVC or PVDF, or in other special materials on request. Bellows type dampeners can also be made with the areas in contact with the liquid in PVC, PVDF or PTFE on request.
Bellows type dampeners are suitable for corrosive liquids, but only for low pressures. The volume of this kind of dampeners range from 0.1 to 15 litres for the PTFE bellows ones and they are available with design pressures of up to 40 bar.
Apart from our standard design bellows type pulsation dampeners, we also manufacture different types of special design bellows dampeners on request.
Additional Information:
Product Details:
Brand | Prikosa Engineering |
Color | STD. |
Material | PP/PVC/PVDF/PTFE/MS/FRP/SS316/SS304... ETC. |
Warranty | 12 months |
Model Name/Number | PE/AODD/1.0/1/2 |
Gaskets | FKM/NITRILE/NEOPRENE/PTFE STC. |
Maximum Working Pressure | 5 to 6 kg/cm2 |
Process Connection | Standard |
Surface Finishing | GOOD |
Country of Origin | Made in India |
The DPD Series Equalizer was designed to remove pressure variation on the discharge end of the reciprocating dosing pump. It has a flow-through design manufactured with Prikosa pump parts. The DPD Equalizer automatically sets and maintains the correct air pressure required to optimize its effectiveness.
Benefits:
• Reduces pipe vibration and shaking.
• Protects in-line equipment.
• Reduces water hammer.
• Absorbs acceleration head.
• Lower system maintenance cost.
• Suction stabilizer.
• Helps prevent leaking at pipe fittings and joints
• Extends and improves pump performance
• Avoids damaging pressure surges.
• Wide range of material and elastomer options
• Self adjusts to system pressure.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Discharge | 70-100 Litres/hr, 50-70 litre/hr, 100-130 litres/hr |
Capacity | 0.1-20 liter |
Brand | Prikosa Engineering |
Color | Natural |
Material | SS316 / SS304 / PVC /PP/ Others. |
Warranty | 12 Months |
Model Name/Number | EPD / RPD / VPD/ BPD |
Maximum Working Pressure | 350 Bar |
Process Connection | As per Requirement. |
Surface Finishing | Matt finish/ Mirror finish |
Accessories | Pulsation dampener |
Bladder pulsation Dampers are the most common type they are used in the vast Preponderance of applications.
The separator element is made of a rubber material (nitrile, EPDM, FKM, butyl, silicone, etc …).
DESCRIPTION AND PERFORMANCE
These type of Pulsation dampener are made from plastic or metal,
Plastic material used in Pulsation dampener are PVC, PTFE, PP, PVDF.
Metallic Pulsation dampener are manufacturer from metal such as MS, SS304/SS304L, SS316/SS316L, Duplex, Super Duplex, Hastelloy, titanium, and others.
The body can be made of plastic or metal. The most common used plastics are PVC, polypropylene and PVDF.
Prikosa Bladder Type Pulsation dampener capacity are ranges from
0.05 to 20.0 Liter, available with design pressure upto 350 bar.In addition to our standard design bladder pulsation dampers, we also design and manufacture different specially designed bladder Dampener upon client order.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Type | AODD PUMP |
Brand | Prikosa Engineering |
Color | std. |
Material | SS316/ SS304/ALLOYS/PP/PVC ETC. |
Max Flow Rate | 10-6000 LPH |
Warranty | 12 MONTHS |
Model Name/Number | DPD |
Gaskets | FKM/NITRILE/NEOPRENE/PTFE STC. |
Maximum Working Pressure | 1BAR TO 100 BAR |
Process Connection | AS PER REQUIREMENT |
Surface Finishing | GOOD |
Country of Origin | Made in India |
PRIKOSA ENGINEERING Diaphragm type Pulsation Dampeners use a PTFE Diaphragm together with a second, neoprene one as separators. The second Diaphragm provides a 100% air-tightness that the porosity of the relatively thin PTFE material of the main membrane can’t fully provide under a relatively high pressure.
DESCRIPTION AND PERFORMANCE
We normally make the body of our membrane type pulsation dampeners in AISI 316L stainless steel; but we also make them in other materials like Duplex, Hastelloy, PVC, or in other special materials, on request.
Membrane type pulsation dampeners are particularly suited for corrosive liquids.
Though our standard membrane type pulsation dampeners are designed for low and medium pressures, we can also manufacture them for high pressures.
Prikosa Diaphragm Type Pulsation dampener capacity are ranges from0.05 to 10 Liter, available with design pressure upto 50 bar.
Apart from our standard design membrane type pulsation dampeners, we also manufacture different types of special design membrane type pulsation dampeners on request.
Additional Information:
Product Details:
Minimum Order Quantity | 01 Unit |
Max Flow Rate | 1 TO 10000 LPH |
Usage/Application | CHEMICAL |
Brand | Prikosa engineering |
Material | SS,CS,PTFE,PP |
Discharge | 1 - 10000LITER/HR |
Warranty Period | 6-12 Months |
Pulsation dampener are used for smooth flow and pressure in procces pipeline due to reciprocation motion of dosing pump or volumetric pump. They are used in a wide range of application.
A Pulsation Dampener is chamber contain with gas inside it, generally dry or sometimes compressed air.
In every Pulsation dampener there is separation material between the gas that pre-charged and liquid in process pipeline, the used of separation media to avoid leakages of gas in pipe line. This separation membrane made up from many elastomer material like, Viton, EPDM, NITRILE, NEOPRENE, SILICON, and thermoplastic material such as PTFE.
Such kind of elastomer material used in Pulsation dampener called as Bladder type, with PTFE separation media known as Bellow type Pulsation dampener.
Bellows type Pulsation dampener used for special application depends on concentration of liquids, working temp. and working pressure and chemical compatibility with separator media.
All the dampener as made according to design meets with ad-2019 ASME VII Div. 1 also with std. ISO 9001:2015. We design and manufacture dampener with different process connection such flanged end, screwed end, socket weld with client demands.
.
Product Details:
Minimum Order Quantity | 1 Number |
Max Flow Rate | 01-10000 LITER/HR |
Usage/Application | CHEMICAL |
Brand | Prikosa make |
Color | Standard |
Material | SS/PP/PVC/PTFE/MS/CS |
Discharge | 01 -10000 LITER / HR |
Warranty Period | 6-12 Months |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Pressure | UPTO 350 BAR |
Nominal Volume | UPTO 10 LITER |
Usage/Application | REDUCE THE PULSATION |
Design | AS PER ASME |
Temperature | STD. |
Capacity | 10 |
Shelf Life | 2 YEAR |
Prikosa piston type accumulators are the strongest and most reliable hydru-pneumatic accumulators in the market. They are made in carbon steel and the separator element is a piston made in aluminium/ Alloy-steel.
Prikosa Made in a range of available volumes from 0.1 to 10 litres and design pressures of up to 350 bar.
We can also provide them fitted with an indicator for pressure.
Additional Information: